Outboard Motor Service Stands, Racks and Dollies


 

Large Outboard Motor Service Stand  -  ME-110

 

me-110_use4 me-110_motor

When any outboard motor needs servicing, this heavy duty Large Outboard Motor Service Stand offers the ideal solution. This outboard motor stand has been tested for over 1000 lbs, and is excellent for both small and large bolt-on outboard motors. It is made to accommodate both short and long shaft motors without needing any adjustments. The mounting surface simulates a transom, both in angle and thickness, keeping the outboard motor naturally oriented while you work. The uprights are angled toward each other on either side of the engine to maximize accessibility. Four heavy duty casters, two of which are locking,  allow for easy movement as well as additional stability. This stand can also double as a outboard rack, display in your show room and at trade shows, or can even be used for storage. Easily assembled. The ME0110 can also be ordered hot-dip galvanized on the main product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

To view assembly instructions click here.

Be sure to check out our battery tray accessory (ME-110-01) which has an innovative design allowing it to sit freely in the front of the stand.


Buy ME-110

me110-01_batterytray
Battery Tray Accessory

 

Specifications  | Large Outboard Service Stand ME-110 |  $649.00 + $99 Shipping
Capacity  Accommodates 30 inch shaft, bolt-on outboards up to 350 hp, 800 lb limit
Dimensions  Length: 35 inches  Width: 43 inches  Height: 46.5 inches
Weight  104 lbs  
Materials  All carbon steel construction
 Red powder coat finish
 4" swivel phenolic roller bearing caster wheels
Accessories

 Battery tray ME-110-01

 

 


 

Outboard Motor Rack  -  ME-150

 

me-150_mtrs me-150

Whether for storing or displaying motors, this Outboard Motor Rack will pull double duty. Join the boat dealers and marinas that use this rack to get customers attention! Why not roll this motor storage rack to a high traffic area such as the parking lot to show off your outboard motors for sale. Roll it back into a secure area at the end of the day easily as this stand includes 4 roller bearing caster wheels with locking capabilities. Stop hiding those used outboards! Get them in front of your customers with this customizable outboard motor storage rack.  To view assembly instructions click here.

Buy ME-150

Specifications  |  Sternmaster Outboard Storage Rack ME-150  |  $929.00 + $99 Shipping
Capacity  Accommodates 10-20 small to medium sized outboards
Dimensions  Length: 52  Width: 36  Height: 70
Weight  250 lbs.  
Materials  All carbon steel construction
 Red powder coat finish
 4" swivel phenolic roller bearing caster wheels, 700 lb  capacity per wheel

Accessories

 None

 


 

Outboard Motor Dolly  -  ME-140

 

me-140_use3 me140-2-newbrake

Tired of using flimsy outboard motor carts to move engines? The ME-140 Outboard Motor Dolly is the perfect solution. Transport and service small clamp-on outboards, approximately up to 30 horsepower, using this sturdy outboard dolly made to accommodate both short and long shaft motors without needing any adjustments. Heavy duty all steel construction and durable powder coated finish ensures that this outboard engine stand will last. Our new design includes a step-on brake system on the back wheels, which will keep this outboard motor dolly firmly in place while you work. The ME-140 can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

Modular construction allows for easy shipping. Click here to view assembly instructions.

Buy ME-140

Specifications  |  Small Outboard Motor Dolly ME-140  |  $399.00 + $59 Shipping
Capacity  Accommodates 25 inch shaft, approximately 30 hp, small clamp-on outboards only
Dimensions  Length: 31.77 in.  Width: 24.5 in.  Height: 43.5 in.
Weight 83 lbs.  
Materials  All carbon steel construction
 Red powder coat finish
 4" swivel phenolic roller bearing caster wheels, 8 " rubber rear wheels
Accessories  Tool tray ME-140-01

 


 

All-Terrain Outboard Motor Dolly  -  ME-140-AT

 

me-140-atEDIT2

The All-Terrain Outboard Motor Dolly will allow you to get your small to mid-sized clamp-on outboard motors transported on even the most rugged terrain, and it will fit through any standard doorway.  Features large 10 x 3 inch foam-filled tires that allow for smooth movement even when the surface is rough. The foam-filled tires also provide maximum stability on adverse terrain, and you'll never run into the issue of getting a flat tire, unlike comparable air-filled tire models. Made to accommodate both short and long shaft motors without needing any adjustment. Also features a brake on the back wheels, so when you need your outboard motor to stay in one place, the Sternmaster All-Terrain Outboard Motor Dolly will. The ME-140AT can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

youtube 32Want to see how great this dolly works? Check out our video on YouTube.

Buy ME-140AT

Specifications  |  All-Terrain Outboard Motor Dolly ME-140-AT  |  $569.00 + $79 Shipping
Capacity Accommodates 25 inch shaft; up to 450 lbs.   Clamp-on outboard.
Dimensions Length: 40 in. Width: 28 in. Height: 45 in.
Weight 90 lbs.
Materials
All carbon steel construction
Red powder coat finish
10 x 3 in. foam-filled tires
Accessories Tool Tray ME-140-01

If you're always looking for a place to put your tools, we also make this convenient tool tray (ME-140-01) that attaches to the handle of the Small Outboard Motor Dolly and All-Terrain Outboard Motor Dolly.

me-140-01_tray
Tool Tray Accessory