Products

Thank you for taking the time to review your recent Sternmaster purchase. We use your input in order to continue to improve the design and functionality of our products. The starred fields are required for submission.


{ BreezingForms : Recent_Purchase }

 

Industrial Shop Carts (Flat or Pan Top) - ME-200 - $475

ShopCartEditResized

The ME-200 Industrial Shop Cart was made to withstand the adverse conditions of any shop.  Manufactured completely from 1/8 inch steel and a customizable powder coat finish, durability will never come into question.  Features two swivel/braking & two rigid, 8 inch, non-marking Duratek casters.  This shop cart will roll over almost anything you'll come across in your shop, and not mark up the floor of even the cleanest shop in the process.  Rated to handle 2400 lbs., there isn't much this cart can't handle.  Available in Flat or Pan Top options.  The Pan Top model features a 1.5 inch lip on the shop cart's top surface.


Buy ME-200


  • Capacity 2400 lbs
    Flat Top or Pan Top Available
  • Dimensions Length: 48 inches
    Width: 24 inches
    Height: 33 inches
    Between Shelves: 22 inches
  • Weight 150 lbs
  • Materials 1/8" Steel
    Red Powdercoat
    8x2 in. Duratek Non-Marking Casters (2 Swivel/Braking, 2 Rigid)




Small Shop Cart - ME-210 - $370

210brownclip

Take a look at our small and sturdy industrial shop cart featuring 2 swivel/braking and 2 rigid rubber wheels with a fully welded frame. An interesting feature on this cart is the included removable clipboard holder which sits on the handle and top shelf to more easily hold those work orders. Like the cart but want a different color? Give our Sales Team a call at 1-800-305-8117 to easily order the cart in a custom color like gray, black, or something to match your logo color scheme.


Buy ME-210


  • Capacity 2000 lbs
    Clipboard Holder Included
  • Dimensions Length: 36 inches
    Width: 24 inches
    Height: 33 inches
    Between Shelves: 22 inches
  • Weight 120 lbs
  • Materials 1/8" Steel
    Red Powdercoat
    6x2 in. Duratek Non-Marking Casters, 600lb capacity (2 Swivel/Braking, 2 Rigid)




All Terrain Small Shop Cart - ME-210AT - $370

210AT

Want something a little different? Think about giving our ME-210AT a try. Featuring our 10" foam filled tires, this cart can roll easily outdoors, over rough terrain, or anywhere you like. With a weight limit of 1600 lbs it is still an extremely heavy duty shop cart. The larger foam filled tires add 4 inches height to the cart, so the bottom shelf is 12" from the ground and the top shelf is at 38". To order the 210 with All Terrain wheels, simply find the drop down menu just above the "Add to Cart" button on the store page and choose the second option for the "10" All Terrain Wheels".


  • Capacity 1600 lbs
    Clipboard Holder Included
  • Dimensions Length: 36 inches
    Width: 24 inches
    Height: 38 inches
    Between Shelves: 22 inches
  • Weight 135 lbs
  • Materials 1/8" Steel
    Red Powdercoat
    10" Foam Filled Tired, 400lb capacity (2 Swivel/Braking, 2 Rigid)




Service Cart

The Sternmaster Service Cart increases the safety and efficiency of in-boat service and oil changes. At over 6 feet tall, the four shelf cart includes a 16 gallon oil tank, gear pump with wireless remote, filter drawer, battery box and charger, 15' hose and hanger, 2 oil filter drain pans, 1/4" foam padding, and more. The cart corners are covered in a plastic sleeve to prevent scratching should the cart bump a boat.


  • Capacity 16 Gallon Oil Tank
  • Dimensions Length: 44 inches
    Width: 26 inches
    Height: 7 ft 2 inches
    To Top Shelf: 6ft
  • Weight 250 lbs
  • Materials Steel Construction
    Red / Black Powdercoat Finish
    Non-Marking Casters (2 Swivel/Braking, 2 Rigid)
    1/4" Foam Padding
  • Included Accessories 16 Gallon Oil Tank
    Gear Pump with Switch
    15 ft Hose with Wireless Pump Remote and Garden Hose Fitting
    Battery Box (battery not included) and Charger

Large Outboard Motor Service Stand  -  ME-110 - $649

me-110_motor

When any outboard motor needs servicing, this heavy duty Large Outboard Motor Service Stand offers the ideal solution. This outboard motor stand has been tested for over 1000 lbs, and is excellent for both small and large bolt-on outboard motors. It is made to accommodate both short and long shaft motors without needing any adjustments. The mounting surface simulates a transom, both in angle and thickness, keeping the outboard motor naturally oriented while you work. The uprights are angled toward each other on either side of the engine to maximize accessibility. Four heavy duty casters, two of which are locking,  allow for easy movement as well as additional stability. This stand can also double as a outboard rack, display in your show room and at trade shows, or can even be used for storage. Easily assembled. The ME0110 can also be ordered hot-dip galvanized on the main product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

To view assembly instructions click here.

Buy ME-110

me110-01_batterytray

Battery Tray Accessory

Be sure to check out our battery tray accessory (ME-110-01) which has an innovative design allowing it to sit freely in the front of the stand.



  • Capacity Accommodates 30 inch shaft, bolt-on outboards up to 350 hp, 800 lb limit
  • Dimensions Length: 35 inches
    Width: 43 inches
    Height: 46 1/2 inches
  • Weight 120 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each




Outboard Motor Rack - ME-150 - $929

me-150_mtrs me-150

Whether for storing or displaying motors, this Outboard Motor Rack will pull double duty. Join the boat dealers and marinas that use this rack to get customers attention! Why not roll this motor storage rack to a high traffic area such as the parking lot to show off your outboard motors for sale. Roll it back into a secure area at the end of the day easily as this stand includes 4 roller bearing caster wheels with locking capabilities. Stop hiding those used outboards! Get them in front of your customers with this customizable outboard motor storage rack.  To view assembly instructions click here.

Buy ME-150


  • Capacity Accommodates 10-20 small to medium sized outboards
  • Dimensions Length: 52 inches
    Width: 36 inches
    Height: 70 inches
  • Weight 250 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each




Outboard Motor Dolly - ME-140 - $399

me-140_use3 me140-2-newbrake

Tired of using flimsy outboard motor carts to move engines? The ME-140 Outboard Motor Dolly is the perfect solution. Transport and service small clamp-on outboards, approximately up to 50 horsepower, using this sturdy outboard dolly made to accommodate both short and long shaft motors without needing any adjustments. Heavy duty all steel construction and durable powder coated finish ensures that this outboard engine stand will last. Our new design includes a step-on brake system on the back wheels, which will keep this outboard motor dolly firmly in place while you work. The ME-140 can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

Modular construction allows for easy shipping. Click here to view assembly instructions.

Buy ME-140


me-140-01_tray

Tool Tray Accessory

If you're always looking for a place to put your tools, we also make this convenient tool tray (ME-140-01) that attaches to the handle of the Small Outboard Motor Dolly and All-Terrain Outboard Motor Dolly.



  • Capacity Accommodates 25 inch shaft, approximately 50 hp
    Small Clamp-on Outboards Only
  • Dimensions Length: 31.77 inches
    Width: 24 1/2 inches
    Height: 43 1/2 inches
  • Weight 83 lbs
  • Materials Steel
    Red Powdercoat
    Two 5" Swivel Casters, 1000 lb Capacity Each
    Two 8" Rubber Rear Wheels




All-Terrain Outboard Motor Dolly - ME-140-AT - $569

me-140-atEDIT2

The All-Terrain Outboard Motor Dolly will allow you to get your small to mid-sized clamp-on outboard motors transported on even the most rugged terrain, and it will fit through any standard doorway.  Features large 10 x 3 inch foam-filled tires that allow for smooth movement even when the surface is rough. The foam-filled tires also provide maximum stability on adverse terrain, and you'll never run into the issue of getting a flat tire, unlike comparable air-filled tire models. Made to accommodate both short and long shaft motors without needing any adjustment. Also features a brake on the back wheels, so when you need your outboard motor to stay in one place, the Sternmaster All-Terrain Outboard Motor Dolly will. The ME-140AT can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

youtube 32Want to see how great this dolly works? Check out our video on YouTube.

Buy ME-140AT


me-140-01_tray

Tool Tray Accessory

If you're always looking for a place to put your tools, we also make this convenient tool tray (ME-140-01) that attaches to the handle of the Small Outboard Motor Dolly and All-Terrain Outboard Motor Dolly.



  • Capacity Accommodates 25 inch shaft, approximately 50 hp
    Small Clamp-on Outboards Only
  • Dimensions Length: 40 inches
    Width: 28 inches
    Height: 45 inches
  • Weight 90 lbs
  • Materials Steel
    Red Powdercoat
    10" x 3" Foam Filled Tires

Outboard Motor Wall Storage Brackets - ME-160 - $179

me 160

Sternmaster's sturdy Outboard Motor Wall Storage Brackets are a great solution to increasing storage space in the shop as a unique option for an outboard motor storage rack. They are designed for a 2x10 inch board. Each bracket has six mounting holes for secure wall attachment. Load capacity is up to your discretion and should be based upon board length, type of wood, and wall strength. This product is intended for clamp-on outboards only.

Buy ME-160


  • Capacity Load capacity should be based upon board strength, type of wood, and wall strength.
    Suitable for clamp-on outboard motors only
    Wood not included
  • Dimensions Length: 8 1/2 inches
    Width: 5 inches
    Height: 15 inches
  • Weight 30 lbs (excluding wood)
  • Materials Steel
    Black Powdercoat




Lightweight Outboard Motor Wall Storage Brackets - ME-165 - $59

smallinuse

Quickly and easily free up that valuable floor space with the smartly designed Sternmaster Lightweight Outboard Motor Wall Storage Brackets featuring carbon steel construction and a customizable load capacity*. They are designed to fit a 2"x 8" board (not included). Each bracket has three mounting holes in the back for easy installation, and two holes on the front panel to bolt in the board so that it holds firm as you use it. The brackets are made from a 14 gauge steel with a wrinkle black powder coat finish.

The 165 fills a need for a residential / light commercial outboard wall storage bracket, and is a lightweight version of the ME-160 (which is meant for heavy duty industrial applications).

Buy ME-165


  • Capacity Load capacity should be based upon board strength, type of wood, and wall strength.
    Suitable for clamp-on outboard motors only
    Wood not included
  • Dimensions Length: 8 inches
    Width: 3 1/2 inches
    Height: 12 inches
  • Weight 9 lbs (excluding wood)
  • Materials 14 Gage Steel
    Textured Black Powdercoat

Hitch-Mounted Outdrive/Lower Unit Service Stand - ME-112 - $99

W_ME_112useme-112

This unique outdrive/lower unit stand is incredibly useful for making house calls. It is made of thick, durable steel, and powder coated in a bright red finish. Each bracket has a scratch preventing liner to help protect your outdrive/sterndrive. It also has a simple stabilizing system to keep drives upright. It fits in any standard 2" receiver. Note: This product is NOT meant for transporting outdrives!

Buy ME-112

  • Capacity Accommodates all outdrives/lower units
    Compatible with 2" hitch receiver
  • Dimensions Length: 28 1/2 inches
    Width: 5 1/2 inches
    Height: 8 inches
  • Weight 12 lbs
  • Materials Steel
    Red Powdercoat




Single Outdrive/Lower Unit Cart - ME-113 - $198

me-113_outdrive me-113

The Single Outdrive/Lower Unit Cart is perfect for transporting stern drives from one end of your shop to the other. Two nylon bolts help keep outdrives/sterndrives upright and stable. The stand features scratch-preventing sheaths to ensure that outdrives are well protected during transport. Locking casters ensure that it stays where you put it. If you are looking for an outdrive dolly, look no farther than our small and space efficient single outdrive/lower unit cart.

Buy ME-113


  • Capacity Accommodates all outdrives/lower units
  • Dimensions Length: 22 inches
    Width: 14 3/4 inches
    Height: 19 1/5 inches
  • Weight 49 1/2 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lbs Capacity Each




Nine Outdrive/Lower Unit Storage Rack - ME-114 - $749

114-black

Need a rack for 9 outdrive/sterndrives? This heavy duty, all steel outdrive boat motor stand is the perfect solution! The Outdrive Storage Rack is made with scratch-preventing sheaths and is powder coated to ensure that the integrity of outdrives remain intact. 4 units will fit on the top rack and 5 units fit offset on the bottom rack. Locking 4" casters ensure that this rack stays in place.

Buy ME-114

  • Capacity Accommodates 9 Outdrives/Lower Units
  • Dimensions Length: 50 1/2 inches
    Width: 24 inches
    Height: 55 1/2 inches
  • Weight 175 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each

Click here to view Outdrive Storage Rack assembly instructions.






Outdrive/Lower Unit Storage Rack EXTENSION - ME-114 EXTENSION - $579

Unlimited Outdrive/Lower Unit Storage Rack Solutions

extended114

Need to store more than 9 outdrives / sterndrives? Get the ME-114 EXTENSION, an add on option to our standard ME-114. As you can see in the photo, the EXTENSION is made with scratch-preventing sheaths and powder coated just like the standard ME-114 (shown in gray), the EXTENSION only ships with 1 leg instead of two so you can bolt it directly to your standard unit - creating a longer storage unit. 4 units fit on the top rack and 5 units fit offset on the bottom rack. The included 3.5" bolts make connecting the standard and EXTENSION very easy. The best part of the EXTENSION is the unlimited amount of storage available by ordering a single ME-114 and as many EXTENSIONS as you want.

Buy ME-114 EXTENSION






Workbench I/O Accessories: ME-180-WBB ($99), ME-180-UG ($129), ME-180-LU ($99)

180a180b

ME-180-WBB Workbench Base Mount bolts to a flat surface (hardware not included) to hold the lower unit and upper gearcase holding adaptors for easy maintenance. $113.99 with shipping. The adaptors are not included.

Add the ME-180-UG Upper Gearcase Holder for $143.99 with shipping. The ME-180-UG is adjustable to fit most gearcases. It easily bolts to the mounting area of the I/O drive for maintenance.

Add the ME-180-LU Lower Unit Holder for $113.99 with shipping. The ME-180-LU slides easily into the base mount for easy maintenance on lower units.

Buy ME-180-WBB


  • Capacity Accommodates all outdrives/lower units
  • Materials 16 Gage Steel
    Red Powdercoat




Sterndrive Installation Cart - ME-186 - $699

ME 186Outdrive

The Sternmaster ME-186 Sterndrive/Outdrive Installation Cart is what we came up with after being asked by technician's to build a different style device for removing and installing lower units.

  • Ease of Use: The low profile rolling frame is easy to push into place and make quick adjustments.
  • Small footprint makes it easier to remove outdrives/sterndrives with limited space around the boat
  • May not have to remove cooling lines or planing devices such as whale tails/hydrofoil fins connected to the cavitation plate
  • At 58 lbs (without removable tray) it is also ideal for mobile servicing
  • In addition to working with your average outdrives/stern drives, this works well with Volvo Penta’s cavitation plates and large outdrives such as the Mercury Bravo Three
  • By raising to a comfortable height, this has been used as a service platform once the outdrive is removed
  • Removable tray included to support oil pans, tools, parts, etc
  • 5” rubber wheels roll over hoses and uneven surfaces quietly and easily
  • Covered lifting forks eliminates possible paint damage to the outdrive
  • Height adjustment of the support forks is from 14” off the ground to 40” high
  • Clears most standard and aftermarket swim platforms

Buy ME-186

  • Capacity Accommodates most sterndrives
  • Dimensions Length: 36 inches
    Width: 25 3/5 inches
    Height: 47 inches
  • Weight 58 lbs without removable tray
    71 lbs with removable tray
  • Materials Steel
    Red/Black Powdercoat
    5" Rubber Wheels, 300 lb Capacity Each