Large Outboard Motor Service Stand  -  ME-110 - $649

me-110_motor

When any outboard motor needs servicing, this heavy duty Large Outboard Motor Service Stand offers the ideal solution. This outboard motor stand has been tested for over 1000 lbs, and is excellent for both small and large bolt-on outboard motors. It is made to accommodate both short and long shaft motors without needing any adjustments. The mounting surface simulates a transom, both in angle and thickness, keeping the outboard motor naturally oriented while you work. The uprights are angled toward each other on either side of the engine to maximize accessibility. Four heavy duty casters, two of which are locking,  allow for easy movement as well as additional stability. This stand can also double as a outboard rack, display in your show room and at trade shows, or can even be used for storage. Easily assembled. The ME0110 can also be ordered hot-dip galvanized on the main product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

To view assembly instructions click here.

Buy ME-110

me110-01_batterytray

Battery Tray Accessory

Be sure to check out our battery tray accessory (ME-110-01) which has an innovative design allowing it to sit freely in the front of the stand.



  • Capacity Accommodates 30 inch shaft, bolt-on outboards up to 350 hp, 800 lb limit
  • Dimensions Length: 35 inches
    Width: 43 inches
    Height: 46 1/2 inches
  • Weight 120 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each




Outboard Motor Rack - ME-150 - $929

me-150_mtrs me-150

Whether for storing or displaying motors, this Outboard Motor Rack will pull double duty. Join the boat dealers and marinas that use this rack to get customers attention! Why not roll this motor storage rack to a high traffic area such as the parking lot to show off your outboard motors for sale. Roll it back into a secure area at the end of the day easily as this stand includes 4 roller bearing caster wheels with locking capabilities. Stop hiding those used outboards! Get them in front of your customers with this customizable outboard motor storage rack.  To view assembly instructions click here.

Buy ME-150


  • Capacity Accommodates 10-20 small to medium sized outboards
  • Dimensions Length: 52 inches
    Width: 36 inches
    Height: 70 inches
  • Weight 250 lbs
  • Materials Steel
    Red Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each




Outboard Motor Dolly - ME-140 - $399

me-140_use3 me140-2-newbrake

Tired of using flimsy outboard motor carts to move engines? The ME-140 Outboard Motor Dolly is the perfect solution. Transport and service small clamp-on outboards, approximately up to 50 horsepower, using this sturdy outboard dolly made to accommodate both short and long shaft motors without needing any adjustments. Heavy duty all steel construction and durable powder coated finish ensures that this outboard engine stand will last. Our new design includes a step-on brake system on the back wheels, which will keep this outboard motor dolly firmly in place while you work. The ME-140 can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

Modular construction allows for easy shipping. Click here to view assembly instructions.

Buy ME-140


me-140-01_tray

Tool Tray Accessory

If you're always looking for a place to put your tools, we also make this convenient tool tray (ME-140-01) that attaches to the handle of the Small Outboard Motor Dolly and All-Terrain Outboard Motor Dolly.



  • Capacity Accommodates 25 inch shaft, approximately 50 hp
    Small Clamp-on Outboards Only
  • Dimensions Length: 31.77 inches
    Width: 24 1/2 inches
    Height: 43 1/2 inches
  • Weight 83 lbs
  • Materials Steel
    Red Powdercoat
    Two 5" Swivel Casters, 1000 lb Capacity Each
    Two 8" Rubber Rear Wheels




All-Terrain Outboard Motor Dolly - ME-140-AT - $569

me-140-atEDIT2

The All-Terrain Outboard Motor Dolly will allow you to get your small to mid-sized clamp-on outboard motors transported on even the most rugged terrain, and it will fit through any standard doorway.  Features large 10 x 3 inch foam-filled tires that allow for smooth movement even when the surface is rough. The foam-filled tires also provide maximum stability on adverse terrain, and you'll never run into the issue of getting a flat tire, unlike comparable air-filled tire models. Made to accommodate both short and long shaft motors without needing any adjustment. Also features a brake on the back wheels, so when you need your outboard motor to stay in one place, the Sternmaster All-Terrain Outboard Motor Dolly will. The ME-140AT can also be ordered hot-dip galvanized on the original product page, the hot dip galvanizing process coats the interior and exterior of all parts and tubing for the ultimate protection against corrosive environments.

youtube 32Want to see how great this dolly works? Check out our video on YouTube.

Buy ME-140AT


me-140-01_tray

Tool Tray Accessory

If you're always looking for a place to put your tools, we also make this convenient tool tray (ME-140-01) that attaches to the handle of the Small Outboard Motor Dolly and All-Terrain Outboard Motor Dolly.



  • Capacity Accommodates 25 inch shaft, approximately 50 hp
    Small Clamp-on Outboards Only
  • Dimensions Length: 40 inches
    Width: 28 inches
    Height: 45 inches
  • Weight 90 lbs
  • Materials Steel
    Red Powdercoat
    10" x 3" Foam Filled Tires