Large Outboard Display Stand - ME-110 D


The ME-110 Display is a minimally designed stand made for display purposes only, it is not to be used as a service stand. The minimal structure allows the motor to stand front and center in your show room or tradeshow booth. The narrower wheelbase takes up less floor space than our service stand and allows easier traffic around it. Fits all standard bolt-on outboard motors up to 800 lbs.

Buy ME-110D

  • Capacity Accommodates 30 inch shaft
    Maximum load of 800 lbs
    Bolt-on Outboards
  • Dimensions Length: 38 1/4 inches
    Width: 35 1/2 inches
    Height: 46 1/4 inches
  • Weight 117 lbs
  • Materials 14 Gage Steel
    Textured Black Powdercoat
    5" Swivel Casters, 1000 lb Capacity Each

Outboard Display Stand - ME-100

me100 03

The Sternmaster Outboard Display Stand will add the perfect touch to your showroom and/or trade show booth by giving it the extra distinction you've been looking for. Each outboard motor stand is precision manufactured using heavy duty steel components and has a smooth powder coated black finish. The engine's cavitation plate is clamped down between two padded surfaces to prevent scratching. This stand can be customized by adding information plates and color. The standard shipped information plate option is the sticker plate, but upgrade at no additional cost to the card plate. The custom plate upgrade will include some additional design and manufacturing costs. Please contact our Sales Team at 1-800-305-8117 for additional customization information or to order a custom stand.

Buy ME-100

  • Capacity Accommodates Small to Medium Sized Outboards
  • Dimensions Length: 20 1/2 inches
    Width: 16 inches
    Height: 15 1/2 inches
  • Weight 17 lbs, 18 lbs with plate
  • Materials Steel
    Smooth Black Powdercoat

Available Plate Styles

  • me 100 01d Standard Option Sticker Plate
  • me 100 02 cp Free Upgrade Card Plate
  • me 100 03d Custom Plate + Fee Lasercut Design

Multi-Outboard Display Stand - ME-105


The Sternmaster Multi-Outboard Motor Stand is capable of displaying three 15 horsepower outboard motors, or 100 lbs. per motor support. If by chance you don't need three motors displayed at once, the Multi-Outboard Motor Stand will remain balanced and stable even with only a single motor on display. Features a removeable post cap with half inch hole for sign placement, and adjustable motor supports which are placed in a triangle pattern. Designed for easy assembly without tools or hardware, the Multi-Outboard Motor Stand will get your outboards on display in no time.

Buy ME-105

  • Capacity Three 15 hp motors / 100 lbs per support
  • Dimensions Base Width: 31 inches
    Height: 37 inches
  • Weight 60 lbs
  • Materials 11 Gage Steel
    Textured Black Powdercoat

Small Outboard Display Stand - ME-90

Small Outboard D 4f85cab4d2556

The Sternmaster Small Outboard Display Stand is a great way to show off your small outboard motor.  Created with a low profile design to make your outboard motor stand out amongst the rest, but with a wide enough base to provide maximum stability, it is manufactured out of steel with a durable black wrinkle powder coat finish. This small outboard motor stand will hold any standard outboard, up to 5 horsepower or 60lbs, using bolted clamps with foam pads to avoid damaging your outboard motor and giving it a snug fit.

Buy ME-90

  • Capacity Modern Outboards 5 hp or up to 60 lbs
    Please note: May not fit all antique outboards
  • Dimensions Length: 20 inches
    Width: 18 inches
    Height: 12 1/2 inches
  • Weight 12 lbs
  • Materials 14 Gage Steel
    Textured Black Powdercoat

Three Outboard Motor Display Stand - ME-106

106 front

Looking for a professional way to display your small outboards? Why not give the ME-106 a try. Perfect for showcasing up to 3 small clamp-on outboards in a straight line, give equal distinction to each motor with this stable display stand. This display comes with 2 brochure holders that can be attached to each side and can hold a stack of tri-fold pamphlets, making it especially great for your store or tradeshow booth.

Buy ME-106

  • Capacity Three Small Clamp-On Outboards
    Maximum Weight of 400 lbs
  • Dimensions Base: 48 inches wide x 36 1/4 inches deep
    Height: 40 inches
    Clamping Area: 36 3/4 inches
  • Weight 61 lbs
  • Materials 14 Gage Steel
    Textured Black Powdercoat

Pontoon / Tritoon Dolly - ME-350 - DISCONTINUED STYLE

me 350

The ME-350 Pontoon/Tritoon Dolly features rubber coated 18" long adjustable bunks allowing it to be used for several different shaped pontoons or a standard hull boat. 1 order is for a single pontoon dolly.

Buy ME-350

  • Capacity 1500 lbs per dolly
  • Dimensions Front to Back: 21 1/2 inches
    Width: 23 1/4 inches
    Height: 8.5 inches (pontoon) or 13.1 inches (tritoon)
  • Weight 50 lbs
  • Materials 11 Gage Steel
    Rubber Coated Bunks
    5" Swivel Casters, 1000 lbs Capacity Each
    Smooth Black Powdercoat

Pontoon/Tritoon Dolly - ME-351

me 351

Our updated Pontoon/Tritoon Dolly design is great for displaying and storing pontoons safely. Use it to move or store pontoons in your shop, your showroom, or at a tradeshow in addition to many other uses. The highlight of our new design is a very high density closed cell foam which creates a much more supported bunk for your pontoon to rest on, as it will gently shape to the weight of your pontoon. The new design is also more compact. The swiveling hard synthetic 5” casters are both durable and heavy duty, rated at 1000 lbs each. During the design process aesthetics were a priority. The black powder coated frame and casters are attractive yet will not detract attention from the pontoon, instead blending into the floor.

Assembly is required.

Buy ME-351

  • Capacity 1500 lbs per dolly
  • Dimensions Front to Back: 19 3/4 inches
    Width: 15 3/4 inches
    Height: 15 inches
  • Weight 50 lbs
  • Materials 11 Gage Steel
    High Density Closed Cell Foam Bunks
    5" Swivel Casters, Each Caster Rated at 1000 lbs Capacity
    Smooth Black Powdercoat